ESC  Boston  |  Silicon Valley  |  India  |  Minneapolis  |  ACE Awards

September 21-22, 2016 Minneapolis Convention Center Minneapolis, MN

ESC Minneapolis 2016 Schedule Viewer

All SessionsSpeakersMy Schedule
View Sessions As:
  
    • Wednesday | 9:00am
    • Wednesday, 9:00am - 9:45am
      Location:  Room 208A
      Mike Schnecker (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
      Wednesday, 9:00am - 9:45am
      Location:  Room 205C
      Charles Fulks (Intuitive Research and Technology)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 9:00am - 9:45am
      Location:  Room 208B
      Greg Davis (Green Hills Software)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 9:00am - 9:45am
      Location:  Room 205D
      Senaka Ratnayake (Intel Corporation)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 10:00am
    • Wednesday, 10:00am - 10:45am
      Location:  Room 205C
      Thom Denholm (Datalight)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 10:00am - 10:45am
      Location:  Room 208B
      Michael Blattau (DfR Solutions), Craig Hillman, PhD (DfR Solutions)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 10:00am - 10:45am
      Location:  Room 205D
      David Ewing (Synapse)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 10:00am - 10:45am
      Location:  Connection Corner, Booth 949
      Max "The Magnificent" Maxfield (Embedded.com)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Wednesday, 10:00am - 10:45am
      Location:  ESC Engineering Theater, Booth 138
      Bob Zeidman (Zeidman Consulting)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
    • Wednesday | 10:15am
    • Wednesday, 10:15am - 11:00am
      Location:  Room 208A
      Mike Schnecker (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
    • Wednesday | 11:00am
    • Wednesday, 11:00am - 11:45am
      Location:  Room 205C
      Jacob Beningo (Beningo Engineering)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 11:00am - 11:45am
      Location:  Room 208B
      Rod Cope (Rogue Wave Software)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 11:00am - 11:45am
      Location:  ESC Engineering Theater, Booth 138
      Max "The Magnificent" Maxfield (Embedded.com)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Wednesday, 11:00am - 11:45am
      Location:  Room 205D
      Adam Taylor (Adiuvo Engineering Ltd.)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 11:45am
    • Wednesday, 11:45am - 1:00pm
      Location:  Room 212/213
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 1:00pm
    • Wednesday, 1:00pm - 1:45pm
      Location:  Room 208CD
      Chuck Carter (Eagre Games)
      Session Type: Keynotes (Free)
      Pass type : Expo, Conference
      Wednesday, 1:00pm - 1:45pm
      Location:  Connection Corner, Booth 949
      Hayley Haggarty (UBM)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
    • Wednesday | 2:00pm
    • Wednesday, 2:00pm - 2:45pm
      Location:  Room 208B
      Kyle Sporre (Digi Wireless Design)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 2:00pm - 2:45pm
      Location:  Connection Corner, Booth 949
      Rob Spiegel (UBM)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Wednesday, 2:00pm - 2:45pm
      Location:  Room 205C
      Richard Leach (Brooks Kushman, P.C.), Rod Cope (Rogue Wave Software)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 2:00pm - 2:45pm
      Location:  Room 208A
      Mike Schnecker (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
      Wednesday, 2:00pm - 2:45pm
      Location:  ESC Engineering Theater, Booth 138
      Michael Dunn (EDN)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Wednesday, 2:00pm - 2:45pm
      Location:  Room 205D
      Duane Benson (Screaming Circuits)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 3:00pm
    • Wednesday, 3:00pm - 3:45pm
      Location:  Connection Corner, Booth 949
      Bill Betten (Devicix)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Wednesday, 3:00pm - 3:45pm
      Location:  Room 208B
      Charles Fulks (Intuitive Research and Technology)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 3:00pm - 3:45pm
      Location:  ESC Engineering Theater, Booth 138
      Max "The Magnificent" Maxfield (Embedded.com)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Wednesday, 3:00pm - 3:45pm
      Location:  Room 205C
      Miles Porter (Painted Harmony Group, Inc.)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 3:00pm - 3:45pm
      Location:  Room 205D
      Jacob Beningo (Beningo Engineering)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 3:15pm
    • Wednesday, 3:15pm - 4:00pm
      Location:  Room 208A
      Mike Schnecker (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
    • Wednesday | 4:00pm
    • Wednesday, 4:00pm - 4:45pm
      Location:  Room 208B
      David Ewing (Synapse)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 4:00pm - 4:45pm
      Location:  Room 205D
      John Kaufmann (Code Things Now)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 4:00pm - 5:00pm
      Location:  ESC Engineering Theater, Booth 138
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Wednesday, 4:00pm - 4:45pm
      Location:  Room 205C
      Jean Labrosse (Micrium)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 4:15pm
    • Wednesday, 4:15pm - 5:00pm
      Location:  Room 208A
      Tony Opferman (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
    • Wednesday | 4:30pm
    • Wednesday, 4:30pm - 6:00pm
      Location:  Lounge A, Level 2
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 9:00am
    • Thursday, 9:00am - 9:45am
      Location:  Room 205D
      Adam Taylor (Adiuvo Engineering Ltd.)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 9:00am - 9:45am
      Location:  Room 208B
      Rob Oshana (NXP)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 9:00am - 9:45am
      Location:  Room 205C
      Charles J. Lord (Independent)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 10:00am
    • Thursday, 10:00am - 10:45am
      Location:  Room 205C
      Bob Zeidman (Zeidman Technologies)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 10:00am - 10:45am
      Location:  Room 205D
      Greg Davis (Green Hills Software)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 10:00am - 10:45am
      Location:  Room 208B
      Eystein Stenberg (Mender.io)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 10:00am - 10:45am
      Location:  ESC Engineering Theater, Booth 138
      Max "The Magnificent" Maxfield (Embedded.com), Jean Labrosse (Micrium), Adam Taylor (Adiuvo Engineering Ltd.), Jacob Beningo (Beningo Engineering)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
    • Thursday | 11:00am
    • Thursday, 11:00am - 11:45am
      Location:  Room 208B
      Jacob Beningo (Beningo Engineering)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 11:00am - 11:45am
      Location:  Connection Corner, Booth 949
      Max "The Magnificent" Maxfield (Embedded.com)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Thursday, 11:00am - 11:45am
      Location:  Room 205D
      Burt Snover (National Instruments)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 11:00am - 11:45am
      Location:  ESC Engineering Theater, Booth 138
      Ann Thryft (Design News), Tyler Pope (3D Printing Ally), Scott Sevcik (Stratasys), Scott Johnston (Formlabs), Donovan Weber (Forecast3D), Rich Baker (Proto Labs)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Thursday, 11:00am - 11:45am
      Location:  Room 205C
      Thom Denholm (Datalight)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 11:45am
    • Thursday, 11:45am - 1:00pm
      Location:  Room 212/213
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 12:00pm
    • Thursday, 12:00pm - 12:45pm
      Location:  Connection Corner, Booth 949
      Hayley Haggarty (UBM)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
    • Thursday | 1:00pm
    • Thursday, 1:00pm - 1:45pm
      Location:  Room 208CD
      George Leopold
      Session Type: Keynotes (Free)
      Pass type : Expo, Conference
      Thursday, 1:00pm - 1:45pm
      Location:  Connection Corner, Booth 949
      Bill Betten (Devicix)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
    • Thursday | 2:00pm
    • Thursday, 2:00pm - 2:45pm
      Location:  Room 205D
      David Ewing (Synapse)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 2:00pm - 2:45pm
      Location:  Room 205C
      Brandon Hart (NimbeLink)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 2:00pm - 2:45pm
      Location:  Connection Corner, Booth 949
      John Jaddou (Addeation), Andreas Pfahnl (Devicix)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Thursday, 2:00pm - 2:45pm
      Location:  ESC Engineering Theater, Booth 138
      Max "The Magnificent" Maxfield (Embedded.com), Adam Taylor (Adiuvo Engineering Ltd.), Jacob Beningo (Beningo Engineering), Charles J. Lord (Independent)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Thursday, 2:00pm - 2:45pm
      Location:  Room 208B
      Jay Abraham (MathWorks)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 3:00pm
    • Thursday, 3:00pm - 3:45pm
      Location:  Room 205C
      Rob Oshana (NXP)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 3:00pm - 3:45pm
      Location:  ESC Engineering Theater, Booth 138
      Suzanne Deffree (UBM)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Thursday, 3:00pm - 3:45pm
      Location:  Room 205D
      Greg Davis (Green Hills Software)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 3:00pm - 3:45pm
      Location:  Room 208B
      Charles Fulks (Intuitive Research and Technology)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
  • Five Quick Ways to Make your IoT Design Cellular

    • Brandon Hart  |  Director of Technical Business Development, NimbeLink
    Location:  Room 205C
    Conference Tracks: Connected Devices and the Internet of Things
    Session Type: Conference (Paid)
    Pass type : Conference
    Vault Recording: TBD

    Connectivity is fundamental to the Internet of Things. For connected IoT devices and systems, accessible, reliable, affordable cellular networking is a practical—in some cases, the only practical—form of connectivity. The challenge is integrating cellular connectivity into new or existing devices quickly enough to bring innovative products to this fast-moving market ahead of competitors.

    This session will demonstrate multiple ways of shortening the development process using end-device-certified modems rather than a chip-down or module approach, along with tools for interfacing those modems to pcbs and microcontrollers. It will demonstrate ways to easily interface existing embedded systems and devices to the cellular network via serial or Ethernet output. It will address existing code and libraries that can simplify specialized software development. And it will look at available and emerging cellular network options.

    Attendees will learn fast-track ways to access cellular networks—both hardware and software aspects of the process—that will fit various types of IoT application.

    Takeaway

    Attendees will learn how to choose suitable modems for various cellular protocols and to quickly integrate those cellular modems with circuitry, microprocessors, power supplies, antennas, and software to create effective IoT products. The presentation will also touch on plug-compatible modem options for adding cellular connectivity to existing embedded systems.

    Intended Audience

    Any maker or product developer whose system will transfer data over the cellular network and who wants to avoid the cost and delay of end-device chip or module certification

    Suitable for those without specific telecom expertise