ESC  Boston  |  Silicon Valley  |  India  |  Minneapolis  |  ACE Awards

September 21-22, 2016 Minneapolis Convention Center Minneapolis, MN

ESC Minneapolis 2016 Schedule Viewer

All SessionsSpeakersMy Schedule
View Sessions As:
  
    • Wednesday | 9:00am
    • Wednesday, 9:00am - 9:45am
      Location:  Room 208A
      Mike Schnecker (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
      Wednesday, 9:00am - 9:45am
      Location:  Room 205C
      Charles Fulks (Intuitive Research and Technology)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 9:00am - 9:45am
      Location:  Room 208B
      Greg Davis (Green Hills Software)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 9:00am - 9:45am
      Location:  Room 205D
      Senaka Ratnayake (Intel Corporation)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 10:00am
    • Wednesday, 10:00am - 10:45am
      Location:  Room 205C
      Thom Denholm (Datalight)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 10:00am - 10:45am
      Location:  Room 208B
      Michael Blattau (DfR Solutions), Craig Hillman, PhD (DfR Solutions)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 10:00am - 10:45am
      Location:  Room 205D
      David Ewing (Synapse)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 10:00am - 10:45am
      Location:  Connection Corner, Booth 949
      Max "The Magnificent" Maxfield (Embedded.com)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Wednesday, 10:00am - 10:45am
      Location:  ESC Engineering Theater, Booth 138
      Bob Zeidman (Zeidman Consulting)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
    • Wednesday | 10:15am
    • Wednesday, 10:15am - 11:00am
      Location:  Room 208A
      Mike Schnecker (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
    • Wednesday | 11:00am
    • Wednesday, 11:00am - 11:45am
      Location:  Room 205C
      Jacob Beningo (Beningo Engineering)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 11:00am - 11:45am
      Location:  Room 208B
      Rod Cope (Rogue Wave Software)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 11:00am - 11:45am
      Location:  ESC Engineering Theater, Booth 138
      Max "The Magnificent" Maxfield (Embedded.com)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Wednesday, 11:00am - 11:45am
      Location:  Room 205D
      Adam Taylor (Adiuvo Engineering Ltd.)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 11:45am
    • Wednesday, 11:45am - 1:00pm
      Location:  Room 212/213
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 1:00pm
    • Wednesday, 1:00pm - 1:45pm
      Location:  Room 208CD
      Chuck Carter (Eagre Games)
      Session Type: Keynotes (Free)
      Pass type : Expo, Conference
      Wednesday, 1:00pm - 1:45pm
      Location:  Connection Corner, Booth 949
      Hayley Haggarty (UBM)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
    • Wednesday | 2:00pm
    • Wednesday, 2:00pm - 2:45pm
      Location:  Room 208B
      Kyle Sporre (Digi Wireless Design)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 2:00pm - 2:45pm
      Location:  Connection Corner, Booth 949
      Rob Spiegel (UBM)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Wednesday, 2:00pm - 2:45pm
      Location:  Room 205C
      Richard Leach (Brooks Kushman, P.C.), Rod Cope (Rogue Wave Software)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 2:00pm - 2:45pm
      Location:  Room 208A
      Mike Schnecker (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
      Wednesday, 2:00pm - 2:45pm
      Location:  ESC Engineering Theater, Booth 138
      Michael Dunn (EDN)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Wednesday, 2:00pm - 2:45pm
      Location:  Room 205D
      Duane Benson (Screaming Circuits)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 3:00pm
    • Wednesday, 3:00pm - 3:45pm
      Location:  Connection Corner, Booth 949
      Bill Betten (Devicix)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Wednesday, 3:00pm - 3:45pm
      Location:  Room 208B
      Charles Fulks (Intuitive Research and Technology)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 3:00pm - 3:45pm
      Location:  ESC Engineering Theater, Booth 138
      Max "The Magnificent" Maxfield (Embedded.com)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Wednesday, 3:00pm - 3:45pm
      Location:  Room 205C
      Miles Porter (Painted Harmony Group, Inc.)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 3:00pm - 3:45pm
      Location:  Room 205D
      Jacob Beningo (Beningo Engineering)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 3:15pm
    • Wednesday, 3:15pm - 4:00pm
      Location:  Room 208A
      Mike Schnecker (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
    • Wednesday | 4:00pm
    • Wednesday, 4:00pm - 4:45pm
      Location:  Room 208B
      David Ewing (Synapse)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 4:00pm - 4:45pm
      Location:  Room 205D
      John Kaufmann (Code Things Now)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Wednesday, 4:00pm - 5:00pm
      Location:  ESC Engineering Theater, Booth 138
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Wednesday, 4:00pm - 4:45pm
      Location:  Room 205C
      Jean Labrosse (Micrium)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Wednesday | 4:15pm
    • Wednesday, 4:15pm - 5:00pm
      Location:  Room 208A
      Tony Opferman (Rohde & Schwarz)
      Session Type: Sponsored Session
      Pass type : Conference, Expo
    • Wednesday | 4:30pm
    • Wednesday, 4:30pm - 6:00pm
      Location:  Lounge A, Level 2
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 9:00am
    • Thursday, 9:00am - 9:45am
      Location:  Room 205D
      Adam Taylor (Adiuvo Engineering Ltd.)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 9:00am - 9:45am
      Location:  Room 208B
      Rob Oshana (NXP)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 9:00am - 9:45am
      Location:  Room 205C
      Charles J. Lord (Independent)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 10:00am
    • Thursday, 10:00am - 10:45am
      Location:  Room 205C
      Bob Zeidman (Zeidman Technologies)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 10:00am - 10:45am
      Location:  Room 205D
      Greg Davis (Green Hills Software)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 10:00am - 10:45am
      Location:  Room 208B
      Eystein Stenberg (Mender.io)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 10:00am - 10:45am
      Location:  ESC Engineering Theater, Booth 138
      Max "The Magnificent" Maxfield (Embedded.com), Jean Labrosse (Micrium), Adam Taylor (Adiuvo Engineering Ltd.), Jacob Beningo (Beningo Engineering)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
    • Thursday | 11:00am
    • Thursday, 11:00am - 11:45am
      Location:  Room 208B
      Jacob Beningo (Beningo Engineering)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 11:00am - 11:45am
      Location:  Connection Corner, Booth 949
      Max "The Magnificent" Maxfield (Embedded.com)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Thursday, 11:00am - 11:45am
      Location:  Room 205D
      Burt Snover (National Instruments)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 11:00am - 11:45am
      Location:  ESC Engineering Theater, Booth 138
      Ann Thryft (Design News), Tyler Pope (3D Printing Ally), Scott Sevcik (Stratasys), Scott Johnston (Formlabs), Donovan Weber (Forecast3D), Rich Baker (Proto Labs)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Thursday, 11:00am - 11:45am
      Location:  Room 205C
      Thom Denholm (Datalight)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 11:45am
    • Thursday, 11:45am - 1:00pm
      Location:  Room 212/213
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 12:00pm
    • Thursday, 12:00pm - 12:45pm
      Location:  Connection Corner, Booth 949
      Hayley Haggarty (UBM)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
    • Thursday | 1:00pm
    • Thursday, 1:00pm - 1:45pm
      Location:  Room 208CD
      George Leopold
      Session Type: Keynotes (Free)
      Pass type : Expo, Conference
      Thursday, 1:00pm - 1:45pm
      Location:  Connection Corner, Booth 949
      Bill Betten (Devicix)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
    • Thursday | 2:00pm
    • Thursday, 2:00pm - 2:45pm
      Location:  Room 205D
      David Ewing (Synapse)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 2:00pm - 2:45pm
      Location:  Room 205C
      Brandon Hart (NimbeLink)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 2:00pm - 2:45pm
      Location:  Connection Corner, Booth 949
      John Jaddou (Addeation), Andreas Pfahnl (Devicix)
      Session Type: Connection Corner (Free)
      Pass type : Conference, Expo
      Thursday, 2:00pm - 2:45pm
      Location:  ESC Engineering Theater, Booth 138
      Max "The Magnificent" Maxfield (Embedded.com), Adam Taylor (Adiuvo Engineering Ltd.), Jacob Beningo (Beningo Engineering), Charles J. Lord (Independent)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Thursday, 2:00pm - 2:45pm
      Location:  Room 208B
      Jay Abraham (MathWorks)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
    • Thursday | 3:00pm
    • Thursday, 3:00pm - 3:45pm
      Location:  Room 205C
      Rob Oshana (NXP)
      Conference Tracks: Embedded Software Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 3:00pm - 3:45pm
      Location:  ESC Engineering Theater, Booth 138
      Suzanne Deffree (UBM)
      Conference Tracks: ESC Engineering Theater
      Session Type: ESC Engineering Theater (Free)
      Pass type : Conference, Expo
      Thursday, 3:00pm - 3:45pm
      Location:  Room 205D
      Greg Davis (Green Hills Software)
      Conference Tracks: Connected Devices and the Internet of Things
      Session Type: Conference (Paid)
      Pass type : Conference
      Thursday, 3:00pm - 3:45pm
      Location:  Room 208B
      Charles Fulks (Intuitive Research and Technology)
      Conference Tracks: Embedded Hardware Design & Verification
      Session Type: Conference (Paid)
      Pass type : Conference
  • Accelerate your Accelerometer Apps: Getting the Most out of your MEMS Accelerometer

    Location:  Room 205D
    Conference Tracks: Embedded Hardware Design & Verification
    Session Type: Conference (Paid)
    Pass type : Conference
    Vault Recording: TBD

    Accelerometers are becoming one of the most common sensors embedded into many familiar electronic devices, from our phones to our FitBits. Low cost, extremely power-efficient MEMS accelerometers offer a wide range of capabilities – so wide in fact, that much of the flexibility and sophistication of these sensors goes unused in many applications. In this session we dig deep to discover this untapped potential, using as our guide the tiny but powerful 3-axis MEMS accelerometer built into our ESC "Hello There!" Badge.

    Whether your application needs to sense vibration, wake on movement, detect taps, respond to orientation changes, or something entirely different, this session with both enlighten and accelerate your accelerometer-based designs.

    Takeaway

    Attendees will gain insights and real-world embedded design knowledge through live demonstrations of the technology in action. Key design tradeoffs will be discussed, with coverage of basic and advanced techniques for interfacing with accelerometers in general, and the LIS3DH (part of the ESC "Hello There!" Badge) in particular.

    Intended Audience

    Embedded software and hardware engineers, or anyone using or thinking of using accelerometers in their products